Sharp MX 4501N MX-2300N MX-2700N MX-3500N MX-3501N MX-4500N MX-4501N - Page 442

TRANSMISSION USING THE SPEAKER When the speaker is used to dial, the fax is sent after the number is dialed and the connection is made. If a person answers, you will be able to hear his or her voice, but you will not be able to speak. Place the original. Place the original face up in the document feeder tray, or face down on the document glass. 1 1 When the document glass is used, only one page can be transmitted. Ready to send. Fax Mode Switch Image Settings Scan 81/2x11 Send Auto Memory TX 2 Direct TX Auto Reception Fax Memory:100% Speaker Resend Address Book Sub Address Special Modes File Quick File Touch the [Speaker] key. You will hear the dial tone through the machine's speaker. After touching the [Speaker] key, you can touch the [Speaker Volume] key to adjust the volume of the speaker. The speaker volume changes each time the [Speaker Volume] key is touched. Adjust the volume to the desired level. Telephone mode. Fax Mode Switch Image Settings Scan 81/2x11 Fax Receive Speaker Volume Send Auto Fax Memory:100% 3 (2) Speaker Resend Address Book Special Modes File Quick File (1) To Cc 1/1 AAA AAA BBB BBB CCC CCC DDD DDD EEE EEE FFF FFF Frequent Use ABCD EFGHI JKLMN OPQRST UVWXYZ Condition Settings Fax Receive Sort Address Enter the destination fax number. (1) Touch the [Address Book] key. (2) Touch the one-touch key of the desired destination. A group key cannot be used. ☞ CALLING UP A FAX NUMBER FROM THE ADDRESS BOOK (page 36) If the fax number of the transmitting machine is not stored in the Address Book, enter the fax number with the numeric keys. ☞ ENTERING A FAX NUMBER WITH THE NUMERIC KEYS (page 35) Wait until the connection is made and then press the [BLACK & WHITE START] key ( ). Transmission begins. 4 To cancel transmission... Touch the [Speaker] key before you press the [BLACK & WHITE START] key ( and transmission will stop. ). The line will be disconnected 26