Sharp MX 4501N MX-2300N MX-2700N MX-3500N MX-3501N MX-4500N MX-4501N - Page 317

SENDING AN IMAGE AT A SPECIFIED TIME (Timer Transmission) This function lets you specify a time at which a transmission or broadcast transmission will automatically take place. Transmission begins automatically at the specified time. Set a transmission to take place at 20:00 At 20:00, the transmission begins automatically • When a timer transmission is stored, keep the main power switch in the "on" position. If the main power switch is in the "off" position at the specified time, transmission will not take place. • When performing a timer transmission, you must scan the original into memory when you set up the transmission. It is not possible to leave the document in the auto document feeder or on the document glass and have it scanned at the specified time of transmission. • Settings selected for a timer transmission (exposure, resolution, special modes, etc.) are automatically cleared after the transmission is finished. (However, when the document filing function is used, the scanned original and settings are stored on the built-in hard drive. For more information on the document filing function, see the Document Filing Guide.) • This function cannot be used in USB memory mode. Place the original. Place the original face up in the document feeder tray, or face 1 1 down on the document glass. Mode Switch Scan Fax Image Settings Internet Fax 2 Send Settings USB Mem. Scan PC Scan Data Entry (1) (2) Address Book Address Entry Special Modes File Quick File Select the mode that you wish to use. (1) Touch the [Mode Switch] key. (2) Touch the key of the mode that you wish to use. 94