Sharp MX 4501N MX-2300N MX-2700N MX-3500N MX-3501N MX-4500N MX-4501N - Page 467

Items displayed in keys of completed jobs The following information appears in the keys of completed jobs in the job status screen. CCC CCC 10:08 11/01 000/001 Printed (1) (2) (3) (1) Mode icon This indicates the type of job. Icon Job type Fax transmission Fax reception Broadcast transmission or serial polling PC-Fax transmission (2) Name of other party For a transmission, the name or fax number of the destination. For a reception, the fax number of the sending party. For a broadcast transmission or serial polling operation, the function name and a broadcast control number (4-digits). (3) Start time The date and time the job was begun. (4) Number of pages Shows the number of pages transmitted / total number of original pages. (4) (5) (5) Status Shows the job status. • Completed job Message "Send OK" "In Memory" "Printed" "Forward OK" "Stopped" Status Transmission completed. Reception completed but the fax has not been printed. (The received fax is being held by the print hold function.) The received fax has been printed. The received fax has been forwarded. The job was stopped. "Number of successful transmission destinations / Total destinations OK" "No response" "Busy" "Reject Reception" "NGxxxxxx" Broadcast transmission or serial polling completed. If transmission to 3 destinations was successful out of a total of 5, "003/005" will appear. An error occurred because there was no response from the destination. An error occurred because the other party was busy. A fax was sent from a party that has been blocked by the anti junk fax function. Transmission/reception was not successful because a communication error occurred (a 6-digit error code appears in xxxxxx.) "Error" An error occurred while the job was being executed. 51