Sharp MX 4501N MX-2300N MX-2700N MX-3500N MX-3501N MX-4500N MX-4501N - Page 262

CHANGING THE COLOR MODE This procedure is used to change the color mode used to scan the original when the [COLOR START] key ( ) or the [BLACK & WHITE START] key ( ) is pressed. Start key Mode Scanning method Auto [COLOR START] key Full Color The machine detects whether the original is color or black and white and automatically selects full color or black and white (Mono 2 or Grayscale) scanning. The original is scanned in full color. This mode is best for full color originals such as catalogues. [BLACK & WHITE START] key Mono2 Grayscale Colors in the original are scanned as black or white. This mode is best for text-only originals. The colors in the original are scanned in black and white as shades of gray (grayscale). Scan Mode Switch Image Settings Auto Exposure 200X200dpi Mono2/Auto Color Mode PDF/PDF 1 Send Settings Resolution Auto 81/2x11 File Format Special Modes Original (1) (2) Address Book Address Entry Special Modes File Quick File Display the color mode screen. (1) Touch the [Image Settings] key. (2) Touch the [Color Mode] key. Scan Color Mode Color Mode B/W Mode Color Auto Full Color Mono2 OK B/W Mono2 Grayscale Grayscale (1) (2) (3) 2 Select the color mode. (1) Touch the key of the mode to be used when the [COLOR START] key ( ) is pressed. You can select whether black & white scanning will take place in Mono 2 or grayscale when [Auto] is selected and a black and white original is scanned. Note that if the file format is set to JPEG, scanning will take place in grayscale. (2) Touch the key of the mode to be used when the [BLACK & WHITE START] key ( ) is pressed. (3) Touch the [OK] key. • System Settings (Administrator): Default Color Mode Settings The default color mode can be changed. • System Settings (Administrator): Disable Change of B/W Setting in Auto Mode This prohibits selection of the black and white original scanning setting when [Auto] is selected for the color mode. 39