Sharp MX 4501N MX-2300N MX-2700N MX-3500N MX-3501N MX-4500N MX-4501N - Page 565

Programming an F-code Memory Box (Polling Memory) Follow the steps below to program a memory box for F-code polling memory. The sub-address and passcode that you program in the memory box are necessary for the other machine to poll your machine (request transmission) using F-code communication. • When programming a new memory box, a sub-address that is already programmed for another box cannot be used. However, the same passcode can be used for more than one memory box. • A total of 100 F-code memory boxes for all functions (polling memory, confidential, and relay broadcast) can be stored. When 100 memory boxes are stored, no further memory boxes be stored. Delete unnecessary memory boxes and then store a new memory box. ☞ Editing and Deleting F-code Memory Boxes (page 157) • A passcode does not need to be stored if the other machine does not use a passcode. SYSTEM Press the [SYSTEM SETTINGS] key. 1 SETTINGS 2 System Settings Total Count Paper Tray Settings Printer Condition Settings Admin Password Exit Default Settings Address Control Document Filing Control List Print (User) Fax Data Receive/Forward USB-Device Check Touch the [Address Control] key. 3 System Settings Address Control Direct Address / Program F-Code Memory Box Custom Index Touch the [F-Code Memory Box] key. OK 4 System Settings F-Code Memory Box Store Polling Memory Confidential OK Relay Broadcast Modify/Delete Polling Memory Confidential Relay Broadcast Touch the [Polling Memory] key in the "Store" (upper) row of keys. 149