Sharp MX 4501N MX-2300N MX-2700N MX-3500N MX-3501N MX-4500N MX-4501N - Page 438
If you have another to scan, change s and then press
View all Sharp MX 4501N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 438 highlights
Press the [BLACK & WHITE START] key 3 ( ). Scanning begins. If you have another page to scan, change pages and then press the [BLACK & WHITE START] key ( ). Repeat until all originals have been scanned. 4 • The resolution and exposure can be changed for each original that is scanned. • If no action is taken for one minute, scanning automatically ends and the transmission is reserved. Place next original. (Pg.No.x) Press [Start]. When finished, press [Read-End] Read-End Touch the [Read-End] key. A beep sounds. Open the automatic document feeder and remove the original. 5 • When scanning is completed, "Job stored." will be displayed together with a job control number. This number can be used to locate the job in the Transaction Report or in the Image Sending Activity Report. • If no action is taken for one minute after the confirmation screen appears, scanning automatically ends and the transmission is reserved. To cancel transmission... Press the [STOP] key ( ) before the [Read-End] key is pressed. • If a fax is being received when the transmission operation is performed, the transmission will be reserved and transmitted after fax reception is completed. • If the memory becomes full while the originals are being scanned, a message will appear and transmission will be canceled. 22