Sharp MX 4501N MX-2300N MX-2700N MX-3500N MX-3501N MX-4500N MX-4501N - Page 97

Auto Paper Selection Setting The paper types* that the Auto Paper Selection function will select can be specified. Select one of the following settings: • Plain Paper • Plain and Recycle Paper • Recycle Paper Select the desired paper type setting and touch the [OK] key. The Auto Paper Selection function will not select any paper types other than the paper types specified with this setting. * The paper type set for each paper tray using "Paper Tray Settings" (page 24) in the system settings (general). Registration Adjustment If the color of text or lines is off when color printing is performed, the colors CMY can be adjusted using K (black) as a reference. To perform this adjustment, touch the [Auto Adjustment] key. A message will appear. Touch the [Execute] key. If auto adjustment is not successful, the [Auto Adjustment] key will be temporarily disabled to prevent repeated execution. The next time the registration adjustment screen is opened after moving to another screen, the key will return to normal. Optimization of the Hard Disk This function optimizes the hard drive of the machine by defragmenting data. If a job is in progress, a message will appear and optimization will not begin until the job is finished. During optimization, the following operations are not possible: • Web page access, reception of print data • Use of keys on the operation panel • Turning off the power with the main power switch of the machine. • Auto Power Shut-Off When optimization is completed, the machine will automatically restart. When the document filing function is frequently used and output of files seems somewhat slow, optimizing the hard drive may improve performance. Tandem Connection Setting This setting is used to configure the IP address and port number of the slave machine when you wish to use two machines (which are used as TCP/IP network printers) in a tandem connection for printing. System Settings Tandem Connection Setting OK IP Address of Slave Machine 0 0 0 0 Port Number 5 0 0 0 1 Tandem Mode Disabling of Master Machine Mode Disabling of Slave Machine Mode For each entry box, select the box, enter the appropriate value with the numeric keys, and touch the [OK] key. To disable the sending of tandem printing jobs, select the [Disabling of Master Machine Mode] checkbox and touch the [OK] key. (Normally this setting is not necessary.) To disable the reception of tandem printing jobs, select the [Disabling of Slave Machine Mode] checkbox and touch the [OK] key. (Normally this setting is not necessary.) • The factory default setting for the port number is [50001]. Unless you experience difficulty with this setting, do not change the port number. • To use the tandem function when user authentication is enabled, the same user information must be stored on both the master machine and slave machine. If the same user information is not stored, the page count may not be added to the appropriate user count or only the master machine may print. Clear All Job Log Data This is used to clear the entire job log. (There is normally no need to use this function.) A log file is kept of jobs run on the machine. The job log can be used to check general use of the machine. The job log can be written to a computer in CSV format using a Web browser. Detect Standard in Auto Color Mode When color mode is set to auto in copy mode, five levels are available for the detection of the original. Specify the number with the keys. When the "Closer to B/W" setting is configured, it makes the original easier to be detected as black and white original. When the "Closer color" setting is configured, it makes the original easier to be detected as a color original. 95