Sharp MX 4501N MX-2300N MX-2700N MX-3500N MX-3501N MX-4500N MX-4501N - Page 104

Interface Settings These settings are used to control and monitor data transmitted to the USB port or network port of the machine. Touch the [Printer Settings] key, touch the [Interface Settings] key, and configure the settings. Hexadecimal Dump Mode This function is used to print the print data from a computer in hexadecimal format together with the corresponding ASCII text. This allows you to check whether or not print data from the computer is being transmitted to the machine correctly. Example of a hexadecimal dump To enable this setting, select the checkbox and touch the [OK] key. I/O Timeout The I/O timeout can be set to any number of seconds from 1 to 999. The I/O timeout function temporarily breaks the connection if the set duration of time elapses without any data being received by the port. After the connection is broken, the port is set to auto selection or the next print job is begun. Specify the time with the keys and touch the [OK] key. (To make the number change quickly, keep your finger on the or key.) Enable USB Port This is used to enable printing from the USB port. To enable this setting, select the checkbox and touch the [OK] key. USB Port Emulation Switching If the machine is connected using the USB port, select the emulated printer language. The settings are the same as those of "Network Port Emulation Switching". • Auto* • PostScript* • PCL Select one of the keys and touch the [OK] key. * When the PS3 expansion kit is installed. Unless printer errors occur frequently, it is recommended that you use the factory default setting "Auto". Enable Network Port This is used to enable printing from the network port. To enable this setting, select the checkbox and touch the [OK] key. Network Port Emulation Switching This setting is used to select the emulated printer language when the machine is connected by a network port. The settings are the same as those of "USB Port Emulation Switching". • Auto* • PostScript* • PCL Select one of the keys and touch the [OK] key. * When the PS3 expansion kit is installed. Unless printer errors occur frequently, it is recommended that you use the factory default setting "Auto". 102