Sharp MX 4501N MX-2300N MX-2700N MX-3500N MX-3501N MX-4500N MX-4501N - Page 96

Disabling of Optional Paper Drawer (When an optional paper drawer is installed.) This setting is used to disable the optional paper drawer, such as when it malfunctions. To enable this setting, select the checkbox and touch the [OK] key. Disabling of Tray Setting This setting is used to prohibit tray (except bypass tray) settings. To enable this setting, select the checkbox and touch the [OK] key. Disabling of Finisher (When a saddle stitch finisher or finisher is installed.) This setting is used to disable the saddle stitch finisher or finisher, such as when the unit malfunctions. To enable this setting, select the checkbox and touch the [OK] key. Disabling of Offset This setting is used to disable the offset function. To enable this setting, select the checkbox and touch the [OK] key. Disabling of Stapler (When a saddle stitch finisher or finisher is installed.) This setting is used to prohibit stapling, such as when the stapler unit of the finisher or the saddle stitch finisher malfunctions. To enable this setting, select the checkbox and touch the [OK] key. Saddle Stitch Position Adjust (When a saddle stitch finisher is installed.) When a saddle stitch finisher is installed, this setting is used to adjust the stapling position (folding position) of the pamphlet staple function. The value can be adjusted in increments of 0.1 mm within a range of ± 3.0 mm from the home position of each paper size. Max. + 3 mm Position moved in the plus direction Min. - 3 mm Position moved in the minus direction 1 2 12 11 Reference position Select the key of the desired paper, specify the value with the keys, and touch the [OK] key. (To make the number change quickly, keep your finger on the or key.) Disabling of Punch (When a punch module is installed.) This setting is used to prohibit punching, such as when the punch module of the finisher or the saddle stitch finisher malfunctions. To enable this setting, select the checkbox and touch the [OK] key. Disabling of Color Mode (When a color-related problem has occurred.) When a color-related problem has occurred and printing is not possible, the use of color mode can be prohibited on an emergency basis and only black and white printing allowed. To enable this setting, select the checkbox and touch the [OK] key. This function is only for use as an emergency measure. Once this setting is enabled, only a service technician can cancel the setting. Promptly contact your dealer or nearest SHARP service department to have a service technician cancel the setting and resolve the color-related problem. 94