Sharp MX 4501N MX-2300N MX-2700N MX-3500N MX-3501N MX-4500N MX-4501N - Page 106
Default Display Setting, Initial Resolution Setting, Default Exposure Settings - scanner manual
View all Sharp MX 4501N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Image Send Settings Scan, Internet fax, and fax settings are described below. Settings for fax are explained in "11. SYSTEM SETTINGS FOR FAX" in the Facsimile Guide. Operation Settings Scan, Internet fax, and fax settings are described below. Touch the [Image Send Settings] key, touch the [Operation Settings] key, and configure the settings. Default Display Setting Five screen selections are available for the base screen that appears when you press the [IMAGE SEND] key, or when you press the [CLEAR ALL] key ( ) in image send mode. • Scan • Internet Fax • Fax • Address Book (ABC) • Address Book (User) When [Switch Automatically to Copy Mode Screen] is selected , the display will automatically switch to the copy mode screen if no action is taken in the image send mode screen for 20 seconds. When the [Hold settings for a while after scanning has been completed] checkbox is selected , the settings will remain in effect a fixed period of time after scanning is completed. Initial Resolution Setting The following settings are available for the default resolutions of scan, Internet fax, and fax mode. • Scan: 100X100dpi 200X200dpi 300X300dpi 400X400dpi 600X600dpi • Internet Fax: 200X100dpi 200X200dpi 200X400dpi 400X400dpi Half Tone 600X600dpi • Fax: Standard Fine Super Fine Half Tone Ultra Fine When using a stored image file, select the [Apply the Resolution Set when Stored] checkbox and touch the [OK] key to use the resolution set when the file was stored. Default Exposure Settings This setting is used to set the default exposure level for scanning originals in image send mode. System Settings Default Exposure Settings OK Auto Manual 1 .3.5 Text/ Prtd.Photo Text Printed Photo Text/Photo Photo Map Moiré Reduction • Exposure The exposure can be adjusted automatically or manually. Select either the [Auto] key or the [Manual] key. If the [Manual] key is selected, specify the exposure with the keys and touch the [OK] key. Lower the level toward "1" for lighter exposure or raise the level toward "5" for darker exposure. • Original Image Type (Configuring the setting is only possible in scanner mode.) The exposure mode can be selected to match the original type. Select the desired key and touch the [OK] key. Text/Prtd. Photo Text/Photo Text Photo* Printed Photo* Map* * Does not appear when the exposure is set to [Auto]. • Moiré Reduction (Configuring the setting is only possible in scanner mode.) To reduce the moire effect when scanning, select the [Moiré Reduction] checkbox and touch the [OK] key. 104