Sharp MX 4501N MX-2300N MX-2700N MX-3500N MX-3501N MX-4500N MX-4501N - Page 30

Paper Type Registration Configure a "User type" when the name of the paper type does not appear in the selections or when you wish to select the tray properties yourself. Up to 7 user types can be stored. SYSTEM Press the [SYSTEM SETTINGS] key. 1 SETTINGS 2 System Settings Total Count Paper Tray Settings Printer Condition Settings Admin Password Exit Default Settings Address Control Document Filing Control List Print (User) Fax Data Receive/Forward USB-Device Check Touch the [Paper Tray Settings] key. 3 System Settings Paper Tray Settings Tray Settings Paper Type Registration Auto Tray Switching Touch the [Paper Type Registration] key. OK 4 System Settings Paper Type Registration Select the paper type to edit. User Type 1 User Type 5 User Type 2 User Type 6 User Type 3 User Type 7 Cancel User Type 4 Touch the paper type that you wish to edit. The user types have been stored by factory default with the names "User Type 1" to "User Type 7". Paper Type Registration No.01 Type Name User Type 1 Fixed Paper Side Disable Staple 5 (2) Cancel Exit Disable Duplex Disable Punch (1) (3) Configure the paper type properties. (1) To change the type name, touch the [Type Name] key and change the name. Clear the pre-entered name, and then enter the desired name (maximum of 14 characters). (2) Touch the checkboxes as desired so that they are or . (3) Touch the [Exit] key. • To enable a property, select the checkbox . • The settings that can be selected vary depending on the peripheral devices installed. 28