Sharp MX 4501N MX-2300N MX-2700N MX-3500N MX-3501N MX-4500N MX-4501N - Page 482

SENDING A FAX AT A SPECIFIED TIME (Timer) When this function is used, transmission takes place automatically at a specified time. The timer transmission function makes it easy to perform reserved transmissions, broadcast transmissions and other transmissions at night or other times when phone rates are low. A timer setting can also be specified for polling reception to receive a fax when you are not present. Set a broadcast transmission in the daytime to take place at 20:00 At 20:00, the broadcast transmission begins automatically (Transmission to the first destination takes place) • When timer transmission is set, always keep the main power switch in the "On" position. Transmission will not take place if the main power is off at the specified time. • When performing a timer transmission, you must scan the original into memory when you set up the transmission. It is not possible to leave the document in the auto document feeder or on the document glass and have it scanned at the reserved time of transmission. • When the transmission is finished, the transmission settings (resolution, destinations, etc.) will be erased. However, the selected settings and transmitted fax image are stored if the document filing function is used. ☞ Document Filing Guide Place the original. Place the original face up in the document feeder tray, or face down on the document glass. 1 1 Ready to send. Fax Scan Send Mode Switch 81/2x11 Auto 2 Image Settings Memory TX Direct TX Auto Reception Fax Memory:100% Speaker Resend Address Book Sub Address Special Modes File Quick File Touch the [Special Modes] key. 66