Sharp MX 4501N MX-2300N MX-2700N MX-3500N MX-3501N MX-4500N MX-4501N - Page 484
Giving Priority To A Reserved Fax Job
View all Sharp MX 4501N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 484 highlights
Press the [BLACK & WHITE START] key ( ). Scanning begins. • If you inserted the original pages in the document feeder tray, all pages are scanned. 6 A beep will sound to indicate that scanning is finished. • If you are scanning the original on the document glass, scan each page one page at a time. When scanning finishes, place the next original and press the [BLACK & WHITE START] key ( ). Repeat until all pages have been scanned and then press the [Read-End] key. A beep will sound to indicate that scanning is finished. • The time can be specified up to a week in advance. • Up to 94 timer transmissions can be stored at once. • Only one timer polling operation can be stored at once. If you wish to poll from multiple machines, store a serial polling timer operation. • If another transmission is in progress when the specified time arrives, the timer operation will begin after that transmission is finished. • Other operations can be performed after a timer transmission is set up. • Dialing with the speaker and direct transmission cannot be used in a timer transmission. • If you give priority to a timer transmission in the job status screen, the timer setting will be canceled and the transmission will begin after the job in progress is finished. ☞ GIVING PRIORITY TO A RESERVED FAX JOB (page 56) To cancel timer transmission... Touch the [Cancel] key in the screen of step 4. 68