Sharp MX 4501N MX-2300N MX-2700N MX-3500N MX-3501N MX-4500N MX-4501N - Page 126

Storing/Calling of System Settings The current system settings can be stored, previously stored system settings can be called up, and the factory default system settings can be restored. Touch the [Storing/Calling of system settings] key and configure the settings. Restore Factory Defaults This is used to return the system settings to the factory default settings. If you wish to create a record of the current settings before restoring the factory default settings, print the current settings using "List Print (Administrator)" (page 116) in the system settings (administrator). After executing this function, exit the system settings, turn off the [POWER] key ( ), wait a brief interval, and then turn the [POWER] key ( ) back on to make the factory default settings take effect. Store Current Configuration This is used to store the currently configured system settings. The stored settings will be retained even if the [POWER] key ( ) is turned off. To call up the stored settings, use "Restore Configuration" which is explained below. Items not stored • Network Settings: These are not stored as unexpected settings may cause damage to the network. • Product Keys: Product Keys are not stored as reissue of keys may be necessary. Restore Configuration This is used to call up and restore settings that were stored using "Store Current Configuration". The current settings will change to the settings called up from memory. 124