Sharp MX 4501N MX-2300N MX-2700N MX-3500N MX-3501N MX-4500N MX-4501N - Page 447

SPECIFYING THE SCAN SIZE OF THE ORIGINAL Specifying the size using paper sizes Fax Mode Switch Image Settings Auto Exposure Standard Memory TX Resolution 1 Direct TX Auto 81/2x11 Special Modes Auto Reception Original Fax Memory:100% (1) (2) Address Book Sub Address Special Modes File Quick File Display the original settings screen. (1) Touch the [Image Settings] key. (2) Touch the [Original] key. The current status appears at the top of the [Original] key Fax Original Scan Size Auto 81/2x11 100% Send Size Auto OK Touch the [Scan Size] key. 2-Sided Booklet 2 2-Sided Tablet Image Orientation To specify the image orientation... Touch the appropriate image orientation key so that it is highlighted. Fax Original Auto Manual Manual AB Inch 51/2x81/2 81/2x11R 51/2x81/2R 81/2x13(216x330) 81/2x11 81/2x14 Standard Size OK 11x17 Long Size Size Input 3 (1) (2) Specify the scan size. (1) Touch the appropriate original size key. (2) Touch the [OK] key. • If you are sending a long original, touch the [Long Size] key. The automatic document feeder must be used for a long original. An original up to 800 mm long can be transmitted. The send size cannot be specified when sending a long original. • To specify an AB size for the scan size, touch the [AB Inch] key to highlight the [AB] side and then specify the scan size. Fax Original Scan Size 51/2x81/2 100% Send Size Auto OK Touch the [OK] key. 4 2-Sided Booklet Image Orientation 2-Sided Tablet 31