Sharp MX 4501N MX-2300N MX-2700N MX-3500N MX-3501N MX-4500N MX-4501N - Page 347
CHECKING THE ACTIVITY LOG Image Sending Activity, Report, INFORMATION APPEARING IN THE RESULT COLUMN
View all Sharp MX 4501N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 347 highlights
CHECKING THE ACTIVITY LOG (Image Sending Activity Report) You can have the machine print a log of recent image sending activity (date, name of other party, time required, result, etc.). The Image Sending Activity Report contains useful information such as the types of errors that occurred. The most recent 199 transactions are included in the report. You can have the machine print the Image Sending Activity Report each time the number of transactions reaches 200, or at a specified time (once a day only). The contents of the Image Sending Activity Report are erased when the report is printed, and thus it cannot be reprinted. System Settings (Administrator): Activity Report Print Select Setting This is used to set the conditions for printing activity reports. The factory default setting is not to print. The Image Sending Activity Report can be set to print each time the number of transactions reaches 200, or at a specified time (once a day only). INFORMATION APPEARING IN THE RESULT COLUMN Error types and other information are printed in the result column of transaction and activity reports. When a transaction report or activity report is printed, check the result of the transaction in the result column and take action as needed. Examples of messages that are printed in the result column Message Explanation OK The transaction was completed normally. OK REPORT A receive report was requested for a transmission, the transmission was completed normally, and the receive report was received from the destination. CANCEL A transmission was stopped while in progress, or a reserved transmission job was canceled. MEM. FULL The memory became full during reception. REJECTED An Internet fax was sent from a party that is blocked. NG REPORT A receive report was requested for a transmission, however, the transmission did not take place correctly and a transmission failed report was received. NO REPORT A receive report was requested for a transmission, however, a report was not received within the timeout time. NG LIMIT Transmission was not possible because the file size exceeded the machine's file size limit setting. RECEIVED An e-mail was received, however, the attached file was not a TIFF-F file or there was no attached file, and thus printing was not possible. FAIL xx (xxxx) The transaction failed due to a communication error. First two digits of communication error number: Error code from 00 to 99. Last four digits of communication error number: Code for use by service technicians. 124