Sharp MX 4501N MX-2300N MX-2700N MX-3500N MX-3501N MX-4500N MX-4501N - Page 679

In this situation... A saddle stitch finisher is installed on the master machine but not on the slave machine. • Copying without stapling: tandem copy is possible. • Copying with stapling: tandem copy is not possible. In this way, if tandem copying is executed using a function that the slave machine does not have, a message will appear. To have the master machine make all copies, touch the [OK] key. To cancel the job, touch the [Cancel] key. If a machine runs out of paper If either the master machine or the slave machine run out of paper, the machine that ran out of paper will hold the job while the machine that still has paper continues the job. When paper is added to the machine that ran out, the job resumes. When user authentication is enabled User authentication is enabled in the master machine: tandem copying is possible. User authentication is enabled in the slave machine but not in the master machine: tandem copying is not possible. To cancel tandem copy... Touch the [Tandem Copy] key in the screen of step 3 so that it is not highlighted. System Settings (Administrator): Tandem Connection Setting This must be configured to use the tandem function. This can also be used to disable the tandem function. 73