Sharp MX 4501N MX-2300N MX-2700N MX-3500N MX-3501N MX-4500N MX-4501N - Page 652

MAKING COPIES USING THE BYPASS TRAY (Copying on special papers) In addition to plain paper, the bypass tray allows you to make copies on transparency film, tab paper, and other special papers. For detailed information on paper that can be loaded in the bypass tray, see the Safety Guide. For precautions and other important information when loading paper in the bypass tray, see "LOADING PAPER IN THE BYPASS TRAY" in the User's Guide. Place the original. Place the original face up in the document feeder tray, or face 1 1 down on the document glass. Place paper in the bypass tray. Insert the paper with print side face down. 2 When loading paper larger than 8-1/2" x 11"R or A4R, be sure to pull out the bypass tray extension. Pull the bypass tray extension all the way out. If the bypass tray extension is not pulled all the way out, the size of the loaded paper will not be correctly displayed. Full Color Color Mode Auto Auto 81/2x11 2-Sided Copy Open the paper settings screen. Original Paper Select Job Detail Plain Output (1) Touch the [Job Detail Settings] key. Settings Special Modes8 x18 Special Modes 3 Auto Exposure (2) Touch the [Paper Select] key. File 100% Copy Ratio Quick File (1) (2) Paper Select 81/2x11 81/2x11R 4 81/2x14 11x17 Plain Plain Plain Plain 81/2x11 Plain (A) (B) OK Set the type and size of paper loaded in the bypass tray. (A) Shows the size of paper loaded in the bypass tray. (B) The currently selected paper type will be displayed. If you wish to use the paper size and paper type shown in (A) and (B), touch (A) and touch the [OK] key. Go to step 8. To change the paper size or paper type, touch (B) and go to the next step. 46