Sharp MX 4501N MX-2300N MX-2700N MX-3500N MX-3501N MX-4500N MX-4501N - Page 678

Special Modes Margin Shift Erase 3 Pamphlet Copy Job Build Dual Page Copy Tandem Copy OK 1/4 (1) (2) Select tandem copy. (1) Touch the [Tandem Copy] key so that it is highlighted. (2) Touch the [OK] key. You will return to the base screen of copy mode. Set the number of copies with the numeric keys. Up to 999 can be set. When the [COLOR START] key ( ) or the [BLACK & WHITE START] key ( ) is pressed, the copies will automatically be divided between the 4 master and slave machines. If an odd number of copies is set, the master machine will print the extra set. If an incorrect number of copies is set... Press the [CLEAR] key ( ) and then enter the correct number. Press the [COLOR START] key ( ) or or the [BLACK & WHITE START] key ( ). Copying will begin. • If the originals were placed in the document feeder tray, the originals are copied. • If you are using the document glass, copy each page one page at a time. If you are using the sort function or other function that requires all originals to be scanned before the copies are printed, you must use the same [START] key that you used to scan the first original to scan each of the remaining originals. The following screen appears when the [START] key is pressed. Starting tandem operation. Please wait. 5 After the message appears, tandem copying begins. If tandem copying is not possible, the following screen appears. Tandem output is not allowed. Output all sets using master machine? (Cancel will delete the job.) OK Cancel To have the master machine make all copies, touch the [OK] key. To cancel the job, touch the [Cancel] key. • To cancel scanning... Press the [STOP] key ( ). • To cancel tandem copying... Touch the [STOP] keys ( ) on both the master machine and the slave machine. 72