Sharp MX 4501N MX-2300N MX-2700N MX-3500N MX-3501N MX-4500N MX-4501N - Page 752

(4) Color OK Adjustments Color Balance Cancel OK 1 2 3 4 5 6 7 8 All Y M C Bk (1) (2), (3) Adjust the color balance. Examples of color balance adjustment The settings of all gradations are moved toward + The settings of all gradations are moved toward - (1) Select the color to be adjusted. Select [Y] (yellow), [M] (magenta), [C] (cyan), or [Bk] (black). If only the rectangular area around the letter in a key is highlighted, the settings have been changed from the factory default settings. (2) Select the gradation to be adjusted. 5 Select the gradation with the keys. Touch the keys to move the highlighting to one of gradations "1" to "8" or "All". To adjust all eight gradations at once, move the highlighting to "All". (3) Adjust the density. To darken the density of the selected gradation, touch the key. To lighten the density, touch the key. Each time one of the keys is touched, the indicator frame moves up or down one level. (4) Touch the [OK] key. When the [OK] key is touched, you will return to the special mode screen. Touch the [OK] key to return to the base screen of the copy mode. To return the color balance values to the default settings... Touch the key. The values of all 8 gradations return to the default color balance values. The default color balance values are set in "Initial Color Balance Setting" in the system settings (administrator). Press the [COLOR START] key ( ). Copying will begin. • If the originals were placed in the document feeder tray, the originals are copied. 6 • If you are using the document glass, copy each page one page at a time. To cancel scanning of the original and copying... Press the [STOP] key ( ). To cancel the color balance setting... Touch the [Cancel] key in the screen of step 5. System Settings (Administrator): Initial Color Balance Setting This is used to set the default values to which the color balance values return when the key is pressed. 146