Sharp MX 4501N MX-2300N MX-2700N MX-3500N MX-3501N MX-4500N MX-4501N - Page 272

When "Sending data has been completed." appears in the touch panel, disconnect the USB memory. 9 Do not disconnect the USB memory while "Processing data." or "Sending data." appear in the touch panel. • When transmission to USB memory is completed, "Sending data has been completed." is displayed. After a brief interval the message is cleared and the base screen of image send mode reappears. (The base screen of image send mode is the screen that appears when the [IMAGE SEND] key on the operation panel is pressed.) • If the USB memory becomes full during scanning... If JPEG is selected for the file format or the "Specified Pages per File" checkbox is selected, a message will appear and scanning will stop. In this case, only the pages that were completely scanned will be stored in the USB device (except when multiple pages per file are specified). • To cancel scanning... Press the [STOP] key ( ) to cancel the operation. • To cancel scanning to USB memory... While scan data is being stored in the USB memory, the message "Sending data." and the [Cancel] key appear in the touch panel. To cancel the storing operation, touch the [Cancel] key. • System Settings (Administrator): Scan Settings This is used to set the default color mode and file format. • System Settings (Administrator): Disable Scan Function The use of PC scan mode and USB memory mode can be prohibited. 49