Sharp MX 4501N MX-2300N MX-2700N MX-3500N MX-3501N MX-4500N MX-4501N - Page 833
Clean the laser unit., Repeat step 8 to clean all holes in the, laser unit 4 holes.
View all Sharp MX 4501N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 833 highlights
8 9 Holes 10 Clean the laser unit. (1) Point the cleaner down and slowly insert the tool into the hole that you wish to clean. Be sure to point the cleaner down. (2) Insert the cleaning tool all the way into the hole and then pull it back out. Pull the cleaning tool out until you feel the tip of the tool leave the cleaning surface of the laser unit. (3) Repeat step (2) two or three times and then remove the cleaning tool. Repeat step 8 to clean all holes in the laser unit (4 holes). There are a total of 4 holes to be cleaned in the laser unit, including the hole cleaned in step 8. Clean all holes. Push the waste toner box into the machine. Push the waste toner box firmly in until it clicks into place. 58
58
8
Clean the laser unit.
(1)
Point the cleaner down and slowly insert
the tool into the hole that you wish to clean.
Be sure to point the cleaner down.
(2)
Insert the cleaning tool all the way into the
hole and then pull it back out.
Pull the cleaning tool out until you feel the tip of the tool
leave the cleaning surface of the laser unit.
(3)
Repeat step (2) two or three times and then
remove the cleaning tool.
9
Repeat step 8 to clean all holes in the
laser unit (4 holes).
There are a total of 4 holes to be cleaned in the laser unit,
including the hole cleaned in step 8. Clean all holes.
10
Push the waste toner box into the
machine.
Push the waste toner box firmly in until it clicks into place.
Holes