Home » Sharp Manuals » Multifunction Devices » Sharp MX 4501N » Manual Viewer

Sharp MX 4501N MX-2300N MX-2700N MX-3500N MX-3501N MX-4500N MX-4501N - Page 400

When [Auto Select] is selected, When a paper tray is selected

Add to My Manuals
Save this manual to your list of manuals

Page 400 highlights

SELECTING THE PAPER This section explains the [Paper Feed] settings ([Paper Source] setting in "General" in Mac OS 9.0 to 9.2.2) in the print settings window. • When [Auto Select] is selected A tray with plain paper or recycled paper (the factory default setting is plain paper only) of the size specified in "Paper Size" in the page settings window is automatically selected. • When a paper tray is selected The specified tray is used for printing regardless of the "Paper Size" setting in the page settings window. A paper type can also be specified for the bypass tray. Check the bypass tray and make sure that the desired type of paper is loaded, and then select the appropriate paper type setting for the bypass tray. • Special media such as envelopes can also be placed in the bypass tray. For the procedure for loading paper and other media in the bypass tray, see "LOADING PAPER IN THE BYPASS TRAY" in the User's Guide. • When "Enable Detected Paper Size in Bypass Tray" (disabled by factory default) or "Enable Selected Paper Type in Bypass Tray" (enabled by factory default) is enabled in the system settings (administrator), printing will not take place if the paper size or paper type specified in the printer driver is different from the paper size or paper type specified in the settings of the bypass tray. • When a paper type is selected A tray with the specified type of paper and the size specified in "Paper Size" in the page settings window is used for printing. System Settings (Administrator): Exclude Bypass-Tray from Auto Paper Select When [Auto Select] is selected, specify whether or not the paper in the bypass tray will be excluded from the paper that can be automatically selected. This setting is disabled by factory default, and thus paper in the bypass tray is included in the paper that can be automatically selected. If special types of paper are frequently loaded in the bypass tray, it is recommended that this setting be enabled. 45

Section	Page
TABLE OF CONTENTS	776
ABOUT THIS MANUAL	777
MANUALS PROVIDED WITH THE MACHINE	777
BEFORE USING THE MACHINE	779
PART NAMES AND FUNCTIONS	779
EXTERIOR	779
INTERIOR	781
AUTOMATIC DOCUMENT FEEDER	782
CONNECTORS	783
OPERATION PANEL	784
TOUCH PANEL	786
PRINT/SEND STATUS (JOB STATUS)	787
TURNING THE POWER ON AND OFF	788
ENERGY SAVE FUNCTIONS	789
[POWER SAVE] KEY	789
USER AUTHENTICATION	790
AUTHENTICATION BY USER NUMBER	790
AUTHENTICATION BY LOGIN NAME / PASSWORD	792
LOADING PAPER	795
IMPORTANT POINTS ABOUT PAPER	795
NAMES AND LOCATIONS OF TRAYS	795
THE MEANING OF \	796
USEABLE PAPER	796
TRAY SETTINGS FOR TRAYS 1 TO 4	798
LOADING PAPER	798
CHANGING THE PAPER SIZE	799
LOADING PAPER IN TRAY 5 (Large capacity tray)	801
LOADING PAPER IN THE BYPASS TRAY	803
IMPORTANT POINTS WHEN USING THE BYPASS TRAY	805
ORIGINALS	808
PLACING THE ORIGINAL	808
PLACING ORIGINALS IN THE AUTOMATIC DOCUMENT FEEDER	808
PLACING THE ORIGINAL ON THE DOCUMENT GLASS	811
PERIPHERAL DEVICES	813
PERIPHERAL DEVICES	813
FINISHER	815
PART NAMES	815
SUPPLIES	815
FINISHER MAINTENANCE	816
SADDLE STITCH FINISHER	820
PART NAMES	820
SUPPLIES	820
SADDLE STITCH FINISHER MAINTENANCE	821
MAINTENANCE	827
REGULAR MAINTENANCE	827
CLEANING THE DOCUMENT GLASS AND AUTOMATIC DOCUMENT FEEDER	827
CLEANING THE MAIN CHARGER OF THE PHOTOCONDUCTIVE DRUM	830
CLEANING THE BYPASS FEED ROLLER	830
CLEANING THE ORIGINAL FEED ROLLER	830
CLEANING THE LASER UNIT	831
REPLACING THE TONER CARTRIDGES	835
REPLACING THE WASTE TONER BOX	838
ENTERING TEXT	841
FUNCTIONS OF THE MAIN KEYS	841
CHANGING THE ENTRY MODE	842
ENTERING TEXT FROM AN EXTERNAL KEYBOARD	842

Match case Limit results 1 per page

SELECTING THE PAPER

This section explains the [Paper Feed] settings ([Paper Source] setting in "General" in Mac OS 9.0 to 9.2.2) in the print

settings window.

•

When [Auto Select] is selected

A tray with plain paper or recycled paper (the factory default setting is plain paper only) of the size specified in "Paper

Size" in the page settings window is automatically selected.

•

When a paper tray is selected

The specified tray is used for printing regardless of the "Paper Size" setting in the page settings window. A paper type

can also be specified for the bypass tray. Check the bypass tray and make sure that the desired type of paper is

loaded, and then select the appropriate paper type setting for the bypass tray.

•

When a paper type is selected

A tray with the specified type of paper and the size specified in "Paper Size" in the page settings window is used for

printing.

• Special media such as envelopes can also be placed in the bypass tray. For the procedure for loading paper and other

media in the bypass tray, see "LOADING PAPER IN THE BYPASS TRAY" in the User's Guide.

• When "Enable Detected Paper Size in Bypass Tray" (disabled by factory default) or "Enable Selected Paper Type in

Bypass Tray" (enabled by factory default) is enabled in the system settings (administrator), printing will not take place if the

paper size or paper type specified in the printer driver is different from the paper size or paper type specified in the settings

of the bypass tray.

System Settings (Administrator): Exclude Bypass-Tray from Auto Paper Select

When [Auto Select] is selected, specify whether or not the paper in the bypass tray will be excluded from the paper that can

be automatically selected. This setting is disabled by factory default, and thus paper in the bypass tray is included in the

paper that can be automatically selected. If special types of paper are frequently loaded in the bypass tray, it is

recommended that this setting be enabled.