Sharp MX 4501N MX-2300N MX-2700N MX-3500N MX-3501N MX-4500N MX-4501N - Page 293

Specifying the size by entering numerical values. When scanning a non-standard size original such as a postcard or card, follow these steps to specify the original size. The width can be from 2-1/2" to 17" (64 mm to 432 mm), and the length can be from 2-1/2" to 11-5/8" (64 mm to 297 mm). Internet Fax Mode Switch Image Settings Auto Exposure 200X100dpi TIFF-F Send Settings Resolution File Format 1 Manual RX Auto 81/2x11 Special Modes Original (1) (2) Address Book Address Entry Special Modes File Quick File Display the original settings screen. (1) Touch the [Image Settings] key. (2) Touch the [Original] key. The automatically detected size appears at the top of the [Original] key. Internet Fax Original Scan Size Auto 81/2x11 100% Send Size Auto OK Touch the [Scan Size] key. 2 2-Sided Booklet Image Orientation 2-Sided Tablet Internet Fax Original OK Enter the scan size. Auto Manual Manual X Y X 17 Y 11 Standard Size (2_1/2 17) inch (2_1/2 11_5/8) inch Size Input (1) Touch the [Size Input] tab. (2) Touch the [X] key and enter the X (horizontal) dimension with the keys. 3 (2), (3) (1) (4) (3) Touch the [Y] key and enter the Y (vertical) dimension with the keys. (4) Touch the [OK] key. System Settings (Administrator): Original Size Detector Setting This is used to set the size entry screen to "inch units" or "mm units". Internet Fax Original Scan Size Send Size OK Touch the [OK] key. X6147 Y6141 Auto The specified size appears in the [Scan Size] key. 4 2-Sided Booklet Image Orientation 2-Sided Tablet • When the scan size is specified by numerical values, the send size cannot be specified. • When the automatic document feeder is used, an original longer that 17" (432 mm) can be scanned (maximum length 31-1/2" (800 mm)). To scan a long original, touch the [Standard Size] tab in the screen of step 3 and then touch the [Long Size] key. ☞Specifying the size using paper sizes (page 69) 70