Sharp MX 4501N MX-2300N MX-2700N MX-3500N MX-3501N MX-4500N MX-4501N - Page 832

Make sure that the cleaner at the tip of the cleaning tool is not dirty. 4 If the cleaner is dirty, remove the cleaner and replace it with a clean one. For the procedure for replacing the cleaner, see Cleaner steps 5 through 7. If the cleaner is not dirty, go to step 8. Pull the replacement cleaner out of the waste toner box. 5 The replacement cleaner is stored at the top of the waste toner box. Grasp the end of the cleaner and pull it out of the waste toner box. Remove the dirty cleaner from the tip of the cleaning tool. (1) Firmly grasp the tool close to where the cleaner is attached. 6 (2) Use your other hand to press down on the hook that secures the cleaner and remove the cleaner. Do not return the removed cleaner to the top of the waste toner box. Attach the new cleaner to the cleaning tool. (1) Align the cleaner hook with the attachment hole in the cleaning tool. 7 (2) Hold the cleaner firmly and push the cleaning tool in. 57