Home » Sharp Manuals » Multifunction Devices » Sharp MX 4501N » Manual Viewer

Sharp MX 4501N MX-2300N MX-2700N MX-3500N MX-3501N MX-4500N MX-4501N - Page 535

Relay Request Transmission Using, F-codes

Add to My Manuals
Save this manual to your list of manuals

Page 535 highlights

RELAY REQUEST TRANSMISSION USING F-CODES This function is used to send a fax to an F-code memory box (relay broadcast) in another machine and have that machine relay the fax to multiple end receiving machines. When the end receiving machines are far from your machine, sending the fax to a relay machine that is close to the end receiving machines can help reduce phone charges. A relay request transmission can be used in combination with the timer transmission function to further reduce phone costs. Your machine Relay machine F-code relay broadcast memory box The fax is transmitted to each of the end receiving machines programmed in the F-code relay broadcast memory box. Transmission Transmission specifying an F-code Sub-address: AAAAAAAA Passcode: XXXXXXXX Box name: BBBB Sub-address: AAAAAAAA Passcode: XXXXXXXX End receiving machines are programmed in this box. • Verify the F-code (sub-address and passcode) and end receiving machines programmed in the memory box (relay broadcast) before you perform an F-code relay request transmission. • Before this function can be used, the end receiving machines must be programmed in the F-code memory box (relay broadcast) in the relay machine. • The end receiving machines do not need to support F-code communication. • This function can be used in combination with a broadcast transmission or timer transmission. An F-code relay request transmission can also be stored in a program. • Your machine (the machine that requests a relay broadcast transmission) only bears the cost of sending the fax to the other machine (the relay machine). The other machine (the relay machine) bears the cost of sending the fax to each of the end receiving machines. System Settings for Fax: F-Code Memory Box This is used to create memory boxes (relay broadcast) for F-code relay broadcast transmission. A memory box name, sub-address, passcode, and end receiving machines are programmed in each box. ☞ Programming an F-code Memory Box (Relay Broadcast) (page 154) 119

Section	Page
TABLE OF CONTENTS	776
ABOUT THIS MANUAL	777
MANUALS PROVIDED WITH THE MACHINE	777
BEFORE USING THE MACHINE	779
PART NAMES AND FUNCTIONS	779
EXTERIOR	779
INTERIOR	781
AUTOMATIC DOCUMENT FEEDER	782
CONNECTORS	783
OPERATION PANEL	784
TOUCH PANEL	786
PRINT/SEND STATUS (JOB STATUS)	787
TURNING THE POWER ON AND OFF	788
ENERGY SAVE FUNCTIONS	789
[POWER SAVE] KEY	789
USER AUTHENTICATION	790
AUTHENTICATION BY USER NUMBER	790
AUTHENTICATION BY LOGIN NAME / PASSWORD	792
LOADING PAPER	795
IMPORTANT POINTS ABOUT PAPER	795
NAMES AND LOCATIONS OF TRAYS	795
THE MEANING OF \	796
USEABLE PAPER	796
TRAY SETTINGS FOR TRAYS 1 TO 4	798
LOADING PAPER	798
CHANGING THE PAPER SIZE	799
LOADING PAPER IN TRAY 5 (Large capacity tray)	801
LOADING PAPER IN THE BYPASS TRAY	803
IMPORTANT POINTS WHEN USING THE BYPASS TRAY	805
ORIGINALS	808
PLACING THE ORIGINAL	808
PLACING ORIGINALS IN THE AUTOMATIC DOCUMENT FEEDER	808
PLACING THE ORIGINAL ON THE DOCUMENT GLASS	811
PERIPHERAL DEVICES	813
PERIPHERAL DEVICES	813
FINISHER	815
PART NAMES	815
SUPPLIES	815
FINISHER MAINTENANCE	816
SADDLE STITCH FINISHER	820
PART NAMES	820
SUPPLIES	820
SADDLE STITCH FINISHER MAINTENANCE	821
MAINTENANCE	827
REGULAR MAINTENANCE	827
CLEANING THE DOCUMENT GLASS AND AUTOMATIC DOCUMENT FEEDER	827
CLEANING THE MAIN CHARGER OF THE PHOTOCONDUCTIVE DRUM	830
CLEANING THE BYPASS FEED ROLLER	830
CLEANING THE ORIGINAL FEED ROLLER	830
CLEANING THE LASER UNIT	831
REPLACING THE TONER CARTRIDGES	835
REPLACING THE WASTE TONER BOX	838
ENTERING TEXT	841
FUNCTIONS OF THE MAIN KEYS	841
CHANGING THE ENTRY MODE	842
ENTERING TEXT FROM AN EXTERNAL KEYBOARD	842

Match case Limit results 1 per page

119

RELAY REQUEST TRANSMISSION USING

F-CODES

This function is used to send a fax to an F-code memory box (relay broadcast) in another machine and have that

machine relay the fax to multiple end receiving machines.

When the end receiving machines are far from your machine, sending the fax to a relay machine that is close to the end

receiving machines can help reduce phone charges. A relay request transmission can be used in combination with the

timer transmission function to further reduce phone costs.

• Verify the F-code (sub-address and passcode) and end receiving machines programmed in the memory box (relay

broadcast) before you perform an F-code relay request transmission.

• Before this function can be used, the end receiving machines must be programmed in the F-code memory box (relay

broadcast) in the relay machine.

• The end receiving machines do not need to support F-code communication.

• This function can be used in combination with a broadcast transmission or timer transmission. An F-code relay request

transmission can also be stored in a program.

• Your machine (the machine that requests a relay broadcast transmission) only bears the cost of sending the fax to the

other machine (the relay machine). The other machine (the relay machine) bears the cost of sending the fax to each of the

end receiving machines.

System Settings for Fax: F-Code Memory Box

This is used to create memory boxes (relay broadcast) for F-code relay broadcast transmission.

A memory box name, sub-address, passcode, and end receiving machines are programmed in each box.

☞

Programming an F-code Memory Box (Relay Broadcast)

(page 154)

Your machine

Transmission

The fax is transmitted to each of the

end receiving machines programmed

in the F-code relay broadcast memory

box.

Relay machine

F-code relay

broadcast memory

box

Box name: BBBB

Sub-address: AAAAAAAA

Passcode: XXXXXXXX

Sub-address: AAAAAAAA

Passcode: XXXXXXXX

Transmission specifying an F-code

End receiving machines are

programmed in this box.