Sharp MX 4501N MX-2300N MX-2700N MX-3500N MX-3501N MX-4500N MX-4501N - Page 668
Touch the [Erase] key., Select the erase settings., Press the [COLOR START] key
View all Sharp MX 4501N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 668 highlights
Special Modes 3 Margin Shift Erase Pamphlet Copy Job Build Dual Page Copy Tandem Copy OK 1/4 Touch the [Erase] key. (1) (2) (3) Special Modes Erase 4 Edge Erase Center Edge+Center Erase Erase OK Cancel OK Edge 1/2 (0 1) inch Select the erase settings. (1) Touch the desired erase mode. Select one of the three positions. (2) Set the erasure width with . 0" to 1" (0 mm to 20 mm) can be entered. (3) Touch the [OK] key. You will return to the base screen of copy mode. Press the [COLOR START] key ( ) or or the [BLACK & WHITE START] key ( ). Copying will begin. • If the originals were placed in the document feeder tray, the originals are copied. • If you are using the document glass, copy each page one 5 page at a time. If you are using the sort function or other function that requires all originals to be scanned before the copies are printed, you must use the same [START] key that you used to scan the first original to scan each of the remaining originals. To cancel scanning of the original and copying... Press the [STOP] key ( ). When the erase function is used, erase takes place at the edges of the original image. If you also use a ratio setting, the erase width will change according to the selected ratio. For example, if the erase width setting is 1" (20 mm) and the copy is reduced to 50%, the erase width will be 1/2" (10 mm). To cancel the erase setting... Touch the [Cancel] key in the screen of step 4. System Settings (Administrator): Erase Width Adjustment The default erase width can be set from 0" to 1" (0 mm to 20 mm). The factory default setting is "1/2" (10 mm)". 62