Sharp MX 4501N MX-2300N MX-2700N MX-3500N MX-3501N MX-4500N MX-4501N - Page 311

ERASING PERIPHERAL SHADOWS ON THE IMAGE (Erase) The erase function is used to erase shadow lines on images produced when scanning thick originals or books on the document glass. (This function erases the parts of the image where shadows tend to form. The function does not detect shadows and erase only the shadows.) Scanning a thick book Not using the erase function Using the erase function Shadows appear here Erase modes Edge erase Shadows appear in the image. No shadows appear. Center erase Edge + Center erase • Shadows at the edges of the original can also be erased when the automatic document feeder is used. • When using USB memory mode, connect the USB memory device to the machine before performing the procedure below. Place the original. Place the original face up in the document feeder tray, or face down on the document glass. 1 1 Mode Switch Scan Fax Image Settings Internet Fax 2 Send Settings USB Mem. Scan PC Scan Data Entry (1) (2) Address Book Address Entry Special Modes File Quick File Select the mode that you wish to use. (1) Touch the [Mode Switch] key. (2) Touch the key of the mode that you wish to use. 88