Sharp MX 4501N MX-2300N MX-2700N MX-3500N MX-3501N MX-4500N MX-4501N - Page 514

Memory Box - Data Store Once 6 Unlimited (1) OK Specify the number of polling times. (1) Touch the key for the desired number of times. Touch the [Once] key if you want the document cleared from memory after it is transmitted. Touch the [Unlimited] (2) key to allow polling an unlimited number of times. (2) Touch the [OK] key. Public Box Press [Start] to scan original. Scan Send Image Settings 81/2x11 Auto 7 Auto Reception Fax Memory:100% Memory Box List Select image settings and special modes. To select image settings (exposure, resolution, original size, and two-sided original) and special mode settings, touch the [Image Settings] key. The following functions can be selected: Erase, Dual Page Scan, 2in1, Card Shot, Job Build, Mixed Size Original, Slow Scan Mode, Own Name Select. Press the [BLACK & WHITE START] key ( ). Scanning begins. • If you inserted the original pages in the document feeder tray, all pages are scanned. • If you are scanning the original on the document glass, scan 8 each page one page at a time. When scanning finishes, place the next original and press the [BLACK & WHITE START] key ( ). Repeat until all pages have been scanned and then press the [Read-End] key. To cancel scanning... Press the [STOP] key ( ) while the original is being scanned. If another document remains in the memory box (public box), the newly scanned document is added to the previous document. In this case, the number of polling times will be the number set for the newly scanned document. 98