Sharp MX 4501N MX-2300N MX-2700N MX-3500N MX-3501N MX-4500N MX-4501N - Page 295

CHANGING THE FILE FORMAT The file format for sending an Internet fax is normally set to [TIFF-F]. If the destination Internet fax machine does not support full mode (it only supports simple mode), follow the steps below to select [TIFF-S]. Internet Fax Mode Switch Image Settings Auto Exposure 200X100dpi TIFF-F Send Settings Resolution File Format 1 Manual RX Auto 81/2x11 Special Modes Original (1) (2) Address Book Address Entry Special Modes File Quick File Display the format setting screen. (1) Touch the [Image Settings] key. (2) Touch the [File Format] key. Internet Fax File Format 2 TIFF-S OK TIFF-F (1) (2) Select the file format. (1) Touch the key of the desired format. (2) Touch the [OK] key. When [TIFF-S] is selected, the transmission settings are restricted as follows: • Resolution: The selections are [200X100dpi] and [200X200dpi]. If [TIFF-S] is selected after [200X400dpi], [400X400dpi] or [600X600dpi] is selected, the resolution automatically changes to [200X200dpi]. • Send size: Always 8-1/2" x 11"R (A4R). If [TIFF-S] is selected after the send size is changed, the send size is automatically changed to 8-1/2" x 11"R (A4R). If a size larger than 8-1/2" x 11" (A4) is scanned, the size will automatically be reduced to 8-1/2" x 11"R (A4R). When this format is included in a broadcast transmission, the image will be transmitted to all destinations at 8-1/2" x 11"R (A4R). • Special modes: When a ratio setting is selected and the original size is entered, Dual Page Scan, Card Shot, 2in1, and Mixed Size Original cannot be used. 72