Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1033

metric metricvalue metric-type {external | internal} (OPTIONAL) The value used for the redistributed route. Use a metric value that is consistent with the destination protocol. The range is from 0 to 16777215. The default is 0. (OPTIONAL) The external link type associated with the default route advertised into a routing domain. The two options are: • external • internal level-1 level-1-2 level-2 match {external | internal} (OPTIONAL) Routes are independently redistributed into ISIS as Level 1 routes. (OPTIONAL) Routes are independently redistributed into ISIS as Level-1-2 routes. (OPTIONAL) Routes are independently redistributed into ISIS as Level 2 routes. This setting is the default. (OPTIONAL) The command used for OSPF to route and redistribute into other routing domains. The values are • internal • external route-map mapname map-name is an identifier for a configured route map. The route map should filter imported routes from the source routing protocol to the current routing protocol. If you do not specify a map-name, all routes are redistributed. If you specify a keyword, but fail to list route map tags, no routes are imported. Defaults Command Modes Refer to Parameters. • ROUTER ISIS (for IPv4) • CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6) Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.5(0.1) 9.0.2.0 8.3.19.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S6000. Introduced on the S4820T. Intermediate System to Intermediate System (IS-IS) 1033