Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 867

Example Related Commands Dell(conf-if-te-2/2)# dampening 20 800 4500 120 Dell(conf-if-te-2/2)# • clear dampening - clears the dampening counters on all the interfaces or just the specified interface. • show interfaces dampening - displays interface dampening information. description Assign a descriptive text string to the interface. C9000 Series Syntax description desc_text To delete a description, use the no description command. Parameters desc_text Enter a text string up to 240 characters long. Defaults none Command Modes INTERFACE Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 8.1.1.0 7.6.1.0 7.5.1.0 7.4.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the E-Series ExaScale. Introduced on the S-Series. Introduced on the C-Series. Modified for E-Series: Revised from 78 to 240 characters. Usage Information Important Points to Remember: • To use special characters as a part of the description string, you must enclose the whole string in double quotes. • Spaces between characters are not preserved after entering this command unless you enclose the entire description in quotation marks ("desc_text"). Interfaces 867