Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 701

show diag Display results of offline diagnostic tests on a switch. C9000 Series Syntax show diag {cp unit-id [detail | summary]| pe pe-id stack-unit unit-number}|information | linecard slot-id [detail | summary]| testcase {cp | pepe-id | linecard slot-id} } From a PE console, use show diag testcase stack-unit unit number [detail | summary] Parameters cp unit-id pe pe-id stack-unit unitnumber information linecard slot-id summary detail testcase Enter the cp unit-id parameters to display the results only of the offline diagnostic tests run on the Control Processor CPU. The Control Processor CPU ID is 0. Enter the pe pe-id parameters to display the results only of the offline diagnostic tests run on the Port Extender (PE). The PE ID range is from 0 to 255. NOTE: The pe option is only available when the feature extended bridge is enabled. Enter the stack-unit unit-number parameters to display the offline diagnostic test results of a specified stack-unit. Enter the keyword information to view the current diag information in the system. Enter the linecard slot-id parameters to display the results only of the offline diagnostic test run on a specified line card. he range of line-card CPU IDs is from 0 to 11. Each line-card CPU processes packets on the corresponding switch line card; for example, line-card CPU 1 processes packets on line card 1. Enter the keyword summary to display a summary of the offline diagnostic test results. Enter the keyword detail to display detailed information about the offline diagnostic test results. Enter the keyword testcase to display the diag testcases available for CP, PE, or the Linecard. Defaults Command Modes View a summary of the offline diagnostic test results that ran on all CPUs (Control Processor, Route Processor, line cards, and Port Extenders). EXEC Privilege Debugging and Diagnostics 701