Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1707

Defaults Burst size is 100KB. peak-rate is by default the same as committed-rate. Granularity for committed-rate and peak-rate is Mbps unless you use the kbps option. Command Modes QOS-POLICY-IN Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 8.2.1.0 7.6.1.0 7.5.1.0 6.1.1.1 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Added the kbps option on the C-Series, E-Series, and SSeries. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Usage Information The default burst size is 100Kb. If a different value is required, you must configure the burst size to the required value. Related Commands rate shape - shapes traffic output as part of the designated policy. qos-policy-input - creates a QoS output policy. rate-shape Shape traffic output as part of an output QoS policy. C9000 Series Syntax Parameters rate-shape {kbps | pps} peak-rate {burst-kbps | burst-packets} [committed {kbps | pps} committed-rate {burst-kbps | burstpackets}] kbps Enter the keyword kbps to specify the rate limit in kilobits per second (Kbps) in multiples of 64. The default granularity is Megabits per second (Mbps).The range is from 0 to 40000000. Quality of Service (QoS) 1707