Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1690

To remove the bandwidth percentage, use the no bandwidth-percentage command. Parameters percentage Enter the percentage assignment of weight to the class/ queue. The range is from 1 to 100% (granularity 1%). Defaults none Command Modes CONFIGURATION (conf-qos-policy-out) Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.1.9.0 8.3.11.1 8.3.7.0 6.2.1.1 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the E-Series. Usage Information The unit of bandwidth percentage is 1%. If the sum of the bandwidth percentages given to all eight classes exceeds 100%, the bandwidth percentage automatically scales down to 100%. Related Commands qos-policy-output - creates a QoS output policy. class-map Create a class map. Class maps differentiate traffic so that you can apply separate quality-of-service policies to each class. C9000 Series Syntax Parameters class-map {match-all | match-any} class-map-name [layer2] [cpuqos] match-all match-any Determines how packets are evaluated when multiple match criteria exist. Enter the keywords match-all to determine that the packets must meet all the match criteria in order to be a member of the class. Determines how packets are evaluated when multiple match criteria exist. Enter the keywords match-any to 1690 Quality of Service (QoS)