Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 209

Parameters file-url (OPTIONAL) Enter the following location keywords and information: • For a file on the internal flash, enter flash:// then the filename. • For a file on an FTP server, enter ftp:// user:password@hostip/filepath. • For a file on an NFS-mounted system, enter nfsmount:// NOTE: While switching to a remote NFS file system, it is mandatory to specify the mount-point that indicates the working directory on the NFS file system. You cannot enter the root directory of the remote NFS file system. • For a file on a TFTP server, enter tftp://hostip/filepath. • For a file on the USB port, enter usbflash://filepath. NOTE: The port extender information is displayed only when the extended bridge feature is enabled. Defaults none Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.6.1.0 7.5.1.0 E-Series Description Introduced on the C9010 and C1048P. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Original command. Usage Information NOTE: A filepath that contains a dot ( . ) is not supported. Example Dell#show os-version RELEASE IMAGE INFORMATION : Platform Version Size ReleaseTime C-Series:C9000 9.9(0.0) 125192571 Sep 8 2015 06:08:13 File Management 209