Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1275

Version 7.6.1.0 7.4.1.0 Description Introduced on the C-Series. Introduced on the E-Series. clear lldp neighbors Clear LLDP neighbor information for all interfaces or a specific interface. C9000 Series Syntax Parameters clear lldp neighbors {interface} interface Enter the following keywords and slot/port or number information: • For a 1-Gigabit Ethernet interface, enter the keyword gigabitethernet then the slot/ port information. • For a 10-Gigabit Ethernet interface, enter the keyword tenGigabitEthernet then the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port information. • For a Management Ethernet interface, enter the keyword managementethernet then the slot/port information. • For a port extender (PE) Gigabit Ethernet interface, enter the keyword peGigE then the pe-id / stack-unit / portid information. Defaults none Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.5.1.0 8.3.7.0 7.7.1.0 7.6.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Added support for 4-port 40G line cards on ExaScale. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Link Layer Discovery Protocol (LLDP) 1275