Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 259

ip access-list standard Create a standard IP access list (IP ACL) to filter based on IP address. C9000 Series Syntax ip access-list standard access-list-name To delete an access list, use the no ip access-list standard accesslist-name command. Parameters access-list-name Enter a string up to 140 characters long as the ACL name. Defaults All IP access lists contain an implicit "deny any"; that is, if no match occurs, the packet is dropped. ACL permit/deny rules are applied when a packet matches the condition in an entry. Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.10.0 8.1.1.0 7.8.1.0 7.6.1.0 7.5.1.0 7.4.1.0 6.5.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the E-Series ExaScale. Increased the name string to accept up to 140 characters. Prior to version 7.8.1.0, names are up to 16 characters long. Introduced on the S-Series. Introduced on the C-Series. Added support for the non-contiguous mask and added the monitor option. Expanded to include the optional QoS order priority for the ACL entry. Usage Information The system supports one ingress and one egress IP ACL per interface. Access Control Lists (ACL) 259