Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1916

Defaults none Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.6.1.0 7.5.1.0 6.2.1.1 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Usage Information The following example configures a community named public that is mapped to the security named guestuser with Read Only (ro) permissions. The security-name parameter maps the community string to an SNMPv3 user/ security name as defined by the community MIB. If a community string is configured without a security-name (for example, snmp-server community public ro), the community is mapped to a default security-name/group: • v1v2creadu / v1v2creadg - maps to a community with ro (read-only) permissions. • v1v2cwriteu/ v1v2cwriteg - maps to a community with rw (read-write) permissions. The community-name parameter indexes this command. If you do not configure the snmp-server community command, you cannot query SNMP data. Only Standard IPv4 ACL and IPv6 ACL is supported in the optional access-list-name. The command options ipv6, security-name, and access-list-name are recursive. In other words, each option can, in turn, accept any of the three options as a sub-option, and each of those sub-options can accept any of the three suboptions as a sub-option, and so forth. The second Example shows the creation of a standard IPv4 ACL called snmp-ro-acl and then assigning it to the SNMP community guest. 1916 Simple Network Management Protocol (SNMP) and Syslog