Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 655

show interfaces ets Displays the ETS configuration applied to egress traffic on an interface, including priority groups with priorities and bandwidth allocation. C9000 Series Syntax Parameters show interface port-type slot/port ets {summary | detail} port-type slot/ port ets {summary | detail} Enter the port-type slot and port ETS information. Enter the keyword summary for a summary list of results or enter the keyword detail for a full list of results. Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.0.2.0 9.2(0.2) 8.3.19.0 8.3.12.0 8.3.16.0 Description Introduced on the C9010. Introduced on the S6000. Down status messages added. Introduced on the S4820T. Introduced on the S4810. Introduced on the MXL 10/40GbE Switch IO Module. Usage Information To clear ETS TLV counters, use the clear ets counters interface port-type slot/port command. To view the ETS show output for multiple ports of a specified slot, you can specify any random port number or a range of ports, or a combination of both. To specify a port range, you can enter a hyphenated range of one or more port range values separated with commas; for example, show interfaces tengigabitethernet 10/0-1 ets summary. To enter any random number of ports, you can enter a comma-separated string of port numbers, for example show interfaces tengigabitethernet 10/2,4 ets summary The following describes the show interface summary command shown in the following example. Field Interface Description Interface type with stack-unit and port number. Data Center Bridging (DCB) 655