Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 599

• EXEC Privilege Command History Version 9.9(0.0) 9.2(1.0) 8.2.1.0 7.4.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the E-Series ExaScale. Introduced show ip bgp ipv6 unicast neighbors Allows you to view the information exchanged by BGP neighbors. C9000 Series Syntax Parameters show ip bgp ipv6 unicast neighbors [ipv6-address prefix-length | ip-address] [advertised-routes | dampened-routes | detail | flap-statistics | routes] ipv6-address prefix-length | ipaddress Enter the IPv6 address in the x:x:x:x::x format followed by the prefix length in the /x format. The range is /0 to /128. NOTE: The :: notation specifies successive hexadecimal fields of zeros or enter an IP address in dotted decimal format to reset all prefixes from that neighbor. advertised-routes (OPTIONAL) Enter the keywords advertised-routes to view only the routes the neighbor sent. dampened-routes (OPTIONAL) Enter the keywords dampened-routes to view information on dampened routes from the BGP neighbor. detail (OPTIONAL) Enter the keyword detail to view neighborspecific internal information for the IPv6 address family. flap-statistics (OPTIONAL) Enter the keywords flap-statistics to view flap statistics on the neighbor's routes. routes (OPTIONAL) Enter the keyword routes to view only the neighbor's feasible routes. Command Modes • EXEC • EXEC Privilege Command History Version 9.9(0.0) 9.2(1.0) Description Introduced on the C9010. Introduced on the Z9500. Border Gateway Protocol 599