Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1616

Usage Information You can connect to an attached PE through Telnet using the connect pe command and view information specific to the PE system. After you log in to a port extender, enter ? or help to display a list of supported commands. Example Dell#connect pe 254 Login: peadmin Password: DellPE> feature extended-bridge Enable 802.1BR (bridge port extender) support on the switch. C9000 Series Syntax [no] feature extended-bridge To disable 802.1BR support on the switch, use the no feature extendedbridge command. Default None Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) Description Introduced on the C9010. Usage Information This command enables support for the 802.1 bridge PE (BR) on your switch. Enabling the PE feature allows you to provision the PE. The no feature extended-bridge command disables bridge PE support and deprovisions a PE. You can verify the extended-bridge feature is enabled using the show feature command. The following example shows the extended-bridge feature is enabled. Example Related Commands Dell>show feature Feature ------VRF Extended-Bridge State ----disabled enabled pe provision - Logically provision or add a PE. 1616 Port Extenders (PE)