Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1673

• peGigE pe-id/stack-unit/port isolated mapping primary vlan-id (OPTIONAL) Enter the keyword isolated and a PVLAN ID number to display the configuration of an isolated PVLAN. (OPTIONAL) Enter the keyword mapping to display the community and isolated PVLAN mapping to primary PVLANs. (OPTIONAL) Enter the keyword primary and a PVLAN ID number to display the configuration of a primary PVLAN. Defaults Command Modes none • EXEC • EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.1 7.8.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the C-Series and S-Series. Usage Information Examples of all types of command output are shown below. The first type of output is the result of not entering an optional keyword. It displays a detailed list of all PVLANs and their member VLANs and interfaces. The other types of output show details about PVLAN subsets. The following describes the show private-vlan command shown in the Examples below. Field Primary Secondary Type Description Displays the VLAN ID of the designated or associated primary VLAN(s). Displays the VLAN ID of the designated or associated secondary VLAN(s). Displays the type of VLAN in which the listed interfaces reside. Private VLAN (PVLAN) 1673