Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1067

Version 8.3.7.0 7.6.1.0 7.5.1.0 E-Series legacy command. Description Introduced on the S4810. Introduced on the S-Series and C-Series. Expanded to support the detail option. Usage Information This command displays the IGMP database, including configured entries for either all groups on all interfaces, all groups on specific interfaces, or specific groups on specific interfaces. The following describes the show ip igmp groups command shown in the following example. Field Group Address Interface Mode Uptime Expires Last Reporter Description Lists the multicast address for the IGMP group. Lists the interface type, slot and port number. Displays the IGMP version used. Displays the amount of time the group has been operational. Displays the amount of time until the entry expires. Displays the IP address of the last host to be a member of the IGMP group. Example Dell#show ip igmp groups Total Number of Groups: 5 IGMP Connected Group Membership Group Address Interface Uptime Expires 225.0.0.0 Vlan 100 00:00:05 00:02:04 225.0.0.1 Vlan 100 00:00:05 00:02:04 225.0.0.2 Vlan 100 00:00:05 00:02:04 225.0.0.3 Vlan 100 00:00:05 00:02:04 225.0.0.4 Vlan 100 00:00:05 00:02:04 Example (VLT) NOTE: The asterisk (*) after the port channel number (Po 2) highlighted in the following example indicates that the port channel is VLT, that the local VLT port channel is down and the remote VLT port is up. Dell#show ip igmp groups Total Number of Groups: 5 IGMP Connected Group Membership Group Address Interface Mode Uptime Expires Last Reporter 225.0.0.0 Vlan 100 IGMPv2 00:00:05 00:02:04 3.0.0.51 Internet Group Management Protocol (IGMP) 1067