Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1579

Version 7.8.1.0 7.7.1.0 Description Introduced on the C-Series for the port-channels and the SSeries. Introduced on the E-Series. Example Related Commands Dell(conf)# ip access-list extended iptv-channels Dell(config-ext-nacl)# permit ip 10.1.2.3/24 225.1.1.0/24 Dell(config-ext-nacl)# permit ip any 232.1.1.0/24 Dell(config-ext-nacl)# permit ip 100.1.1.0/16 any ip access-list extended - configure an access list based on IP addresses or protocols. ip pim ingress-interface-map When the Dell Networking system is the RP, statically map potential incoming interfaces to (*,G) entries to create a lossless multicast forwarding environment. C9000 Series Syntax Parameters ip pim ingress-interface-map std-access-list std-access-list Enter the name of a standard access list. Defaults none Command Modes INTERFACE Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.5(0.1) 8.3.19.0 8.3.12.0 8.4.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the S4810. Introduced Example Dell(conf)# ip access-list standard map1 Dell(config-std-nacl)# permit 224.0.0.1/24 Dell(config-std-nacl)#exit Dell(conf)#int tengig 1/1 Dell(config-if-te-1/1)# ip pim ingress-interface-map map1 PIM-Sparse Mode (PIM-SM) 1579