Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1276

Version 7.4.1.0 Description Introduced on the E-Series. debug lldp interface To display timer events, neighbor additions or deletions, and other information about incoming and outgoing packets, enable LLDP debugging. C9000 Series Syntax debug lldp interface {interface | all}{events | packet {brief | detail} {tx | rx | both}} To disable debugging, use the no debug lldp interface {interface | all}{events} {packet {brief | detail} {tx | rx | both}} command. Parameters interface all events packet brief detail tx Enter the following keywords and slot/port or number information: • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port information. • For a Gigabit Ethernet interface, enter the keyword GigabitEthernet then the slot/port information. • For a Management Ethernet interface, enter the keyword managementethernet then the slot/port information.. • For a port extender Gigabit Ethernet interface, enter the keyword peGigE then the pe-id / stack-unit / port-id information. The pe-id range is from 0 to 255; the stackunit unit-number range is from 0 to 7; and the port-id range is from 1 to 48. • For a 10-Gigabit Ethernet interface, enter the keyword tenGigabitEthernet then the slot/port information. (OPTIONAL) Enter the keyword all to display information on all interfaces. (OPTIONAL) Enter the keyword events to display major events such as timer events. (OPTIONAL) Enter the keyword packet to display information regarding packets coming in or going out. (OPTIONAL) Enter the keyword brief to display brief packet information. (OPTIONAL) Enter the keyword detail to display detailed packet information. (OPTIONAL) Enter the keyword tx to display transmit-only packet information. 1276 Link Layer Discovery Protocol (LLDP)