Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1314

debug ip msdp Turn on MSDP debugging. C9000 Series Syntax debug ip msdp {event peer address | packet peer address | pim} To turn debugging off, use the no debug ip msdp {event peer address | packet peer address | pim} command. Parameters event peer address packet peer address pim Enter the keyword event then the peer address in a dotted decimal format (A.B.C.D.). Enter the keyword packet then the peer address in a dotted decimal format (A.B.C.D.). Enter the keyword pim to debug advertisement from PIM. Defaults Not configured. Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.5(0.1) 8.3.19.0 8.3.11.1 8.3.7.0 6.2.1.1 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced ip msdp cache-rejected-sa Enable an MSDP cache for the rejected source-active entries. C9000 Series Syntax ip msdp cache-rejected-sa {number} 1314 Multicast Source Discovery Protocol (MSDP)