Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1704

Version 7.6.1.0 6.1.1.1 Description Introduced on the C-Series and S-Series. Introduced on the E-Series. Usage Information To assign traffic to different flows using QoS policy, use the Output Policy map. This command enables Policy-Map-Output Configuration mode (conf-policymap-out). Related Commands service-queue - assigns a class map and QoS policy to different queues. policy-aggregate - allows an aggregate method of configuring per-port QoS using policy maps. service-policy output - applies an output policy map to the selected interface. qos-policy-input Create a QoS input policy on the router. C9000 Series Syntax qos-policy-input qos-policy-name [layer2] [cpu-qos] To remove an existing input QoS policy from the router, use the no qos-policyinput qos-policy-name [layer2] [cpu-qos] command. Parameters qos-policy-name layer2 cpu-qos Enter the name for the policy map in character format (32 characters maximum). (OPTIONAL) Enter the keyword layer2 to specify a Layer 2 Class Map. The default is Layer 3. Enter the keyword cpu-qos to create a QoS input policy to be used to rate-limit control-plane traffic (CoPP). Defaults Layer 3 Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. 1704 Quality of Service (QoS)