Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 865

unit unit-number range is from 0 to 7; and the port-id range is from 0 to 47. Defaults Without an interface specified, the command clears all interface dampening counters. Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.5.1.0 8.3.7.0 8.1.1.0 7.6.1.0 7.5.1.0 7.4.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Added support for 4-port 40G line cards on ExaScale. Introduced on the S4810. Introduced on the E-Series ExaScale. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Example Related Commands Dell# clear dampening tengigabitethernet 1/2 Clear dampening counters on Te 1/2 [confirm] y Dell# • show interfaces dampening - displays interface dampening information. • dampening - configures dampening on an interface. dampening Configure dampening on an interface. C9000 Series Syntax Parameters dampening [[[[half-life] [reuse-threshold]] [suppressthreshold]] [max-suppress-time]] half-life Enter the number of seconds after which the penalty is decreased. The penalty decreases half after the half-life Interfaces 865