Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 174

source-interface (OPTIONAL) Enter the keywords /source-interface then the interface information to include the source interface. Enter the following keywords and slot/port or number information: • For a Loopback interface, enter the keyword loopback then a number from zero (0) to 16383. • For the Null interface, enter the keyword null then 0. • For a Port Channel interface, enter the keyword port- channel then a number. The range is from 1 to 128. • For Tunnel interface types, enter the keyword tunnel then the slot/ port information. The range is from 1 to 16383. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port information. • For a VLAN interface, enter the keyword vlan then a number from 1 to 4094. Defaults Not configured. Command Modes • EXEC • EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9 (0.0) 9.2(1.0) 8.3.19.0 8.3.12.0 8.3.11.1 8.2.1.0 8.1.1.0 7.9.1.0 7.6.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the S4810. Added support for sourceinterface for link-local IPv6 addressing. Introduced on the Z9000. Introduced on the E-Series ExaScale (IPv6). Increased the number of VLANs on ExaScale to 4094 (was 2094). Introduced on the E-Series ExaScale (IPv4). Introduced VRF. Introduced on the S-Series. 174 Control and Monitoring